Topics
Browse everything Anycubic Guide publishes by category and tag: every topic covered here, with the most recent guides listed under each one.
Tags
- #resin-printing 7
- #msla 6
- #print-tuning 5
- #fdm 3
- #photon-mono 3
- #fep-film 2
- #troubleshooting 2
- #bed-leveling 1
- #buying-guide 1
- #calibration 1
- #exposure-time 1
- #extrusion 1
- #file-formats 1
- #first-layer 1
- #heat-creep 1
- #kobra 1
- #kobra-2 1
- #maintenance 1
- #materials 1
- #nozzle-clog 1
- #photon 1
- #post-processing 1
- #slicing 1
Categories
3d-printing 8 posts
- How to Replace an FEP Film on an Anycubic PhotonSwap a worn FEP or ACF film on an Anycubic Photon vat: screw order, tension by drum sound, trimming, the IPA leak test and resetting the counter.
- Anycubic Resin Exposure Time Settings ExplainedWhat Anycubic's exposure, bottom exposure, bottom layer, transition and off time settings do, the wiki's per-printer values, and how to check with R_E_R_F.
- Anycubic Kobra 2 Not Extruding: Diagnosis and FixesA hand-push test separates extruder faults from hotend clogs, followed by checks for tension, heat creep, nozzle blockage, and PTFE liner damage.
- Anycubic Kobra vs Photon: Which 3D Printer to BuyAnycubic Kobra vs Photon models are compared by build volume, print detail, speed, running costs, ventilation needs, and slicer support.
- Anycubic Photon Mono Resin Sticking to FEP: Causes and FixesA symptom-based guide covers leveling, exposure, resin temperature, peel force, and FEP film condition, with Photon Mono settings and verification steps.
- Anycubic Bed Leveling: Paper Method and Z Offset StepsLevel an Anycubic Kobra or Photon with paper, then set Kobra Z offset from a first-layer test. Diagnose tilt, mesh, and adhesion problems.